Configure additional options
What is the FDC730-BL Touch Screen? The FDC730-BL 7″ touch screen is a form and function replacement for the obsolete FDC-2150i 7″ touch screen
Availability: FDC730-BL is available from stock and includes a new cable to connect from the control system FC5A PLC to the display and replacement SD card to store data log and other saved files.
The FDC730-BL Compatibility: FDC730-BL is compatible with B&L Crematory models using Future Design Controls control system with the Idec F5CA PLC.
NOTE: The FDC730-BL is not compatible with the original Future Design Controls control systems using Idec FC4A PLC. The Idec PLC type may be identified by its part number, be sure to note the Idec Part number is FC5A.
The FDC730-BL display’s function continues to be an operator interface to the PLC Control system. When installed makes no changes to the configured control logic.
Installation: Install the replacement FDC730-BL display with the new cable from the display to the FC5A PLC and wire power to its power input terminals; graphics here of Cable & power wiring.
Panel Cutout: As the obsolete FDC-2107i 7″ display panel cutout dimensions were slightly less than the FDC730-BL, the existing panel cutout height and width must both be increased by approx. 1/8″ of an inch.
Order Matrix
User Manual
Cutout Dimensions
