PR Paperless Recorder
Page 37 of 38

Enabling Devices within EnVision

From the runtime EnVision allows the user to easily enable/disable, assign a Tag Name to any Device in the system, set Device scan time, alarm logging and whether a “beep” sound will occur with alarms.

To turn on a Device (enable), simply place a red “check” in the on/off status check box by clicking on it

To edit a Device tagname, double click the item you wish to change in the grid and enter the desired name (20 characters maximum). In the grahic below the Device Name column is the Device tagname while the columns to the right were the Device names entered in the Configuration program (page 36 of the EnVision tour).

No confusing communication settings to deal with – configure each Device on the link for a specific address and data rate (9.6KB). That’s it!

EnVision Configuration Device Setup  Enabale

Page Navigation - Jump to the specific page in the EnVision Tour

1. EnVision Navigation
2. Device Thumbnails Overview
3. Digital Values
4. System Alarms
5. EnVision Device Alarms
6. PC based Alarm Relay Output
7. General and Service Device Notes
8. Real-Time Trends
9. Single Loop Tuning
10. Data Logging Overview
11. System Data Logging
12. Device Data Logging / Historical Data File
13. Logging Overview Monitor
14. Historical Data File Viewing
15. Searching Historical Data Files
16. Historical Data File Trend Plot
17. CFR21 Part 11 and NADCAP AMS2750E: Historical Data files (Data Log) and Digital Signatures
18. Orion-Mi / nCompass CM Detail View


19. Orion-Mi / nCompass CM Detail View Tab
20. Orion-Mi / nCompass CM Detail View: Auto Tune and Auto/Manual Tabs

21. Orion-Mi / nCompass CM Data Logging Tab
22 Orion-Mi / nCompass CM Schedules Tab (Ramp/Soak Profiles)
23. Orion-Mi / nCompass CM Profile/Schedules: Run, Stop & Hold Profile Schedules

24. Orion-Mi / nCompass CM Schedule Editor Overview
25. Orion-Mi / nCompass CM Schedule Editor: Guaranteed Soak, Loops Active and Auto Start
26. Orion-Mi / nCompass CM Schedule Editor: Stage "Wait For"

27. Orion-Mi / nCompass CM Schedule Editor: Schedule Notes
28. Orion-Mi / nCompass CM - Setup Tab
29. Orion-Mi / nCompass CM Detail View - Setup/IO Monitor
30. Orion-Mi / nCompass CM Detail View - Setup/Schedule Options

Future Design Controls   888.751.5444