PR Paperless Recorder
Page 25 of 38
 

Orion Series Schedule Editor:

  • Guaranteed Soak
  • Loop Active in Schedule
  • Schedule Auto Start

The Schedules tab provides access to set Guaranteed Soak, Loop Active in Schedule & Auto Start features.

Setting Schedule Guaranteed Soak Setpoints

The guaranteed soak settings for the schedule are accessed by pressing the “GUAR SOAK” button.  The Guaranteed Soak option allows the user to set a control tolerance band for each control loops.

EnVision Orion Series Schedule Editor Guaranteed Soak Setpoints

When pressed, the Guaranteed Soak Setpoints window is displayed.

EnVision Orion Series Schedule Editor Guaranteed Soak Setpoint Window

The guaranteed soak values are "global" for the specific Schedule and apply to all stages.  The operation for guaranteed soak can be enabled or disabled for each control loop independently on a "per stage" basis by selecting or de-selecting the soak event when configuring each stage.

Setting Loops Active/Auto Start

The “LOOPS ACTIVE/AUTO START” button provides access to the schedule auto start settings and allows the user to select specific loops to exclude from schedule control when it is run. 

The “Profiling” tab lists all loops configured on the Orion-M controller.  By placing a “check” in the checkbox next to a control loop, that loop will be excluded from schedule control. 

EnVision Orion Series Schedule loops active auto start

The “Auto Start” tab provides access to the auto start settings for the schedule.  This is a feature that can be used to start a schedule on a specified date or day and time.

EnVision Orion Series Schedule loops active auto start

Page Navigation - Jump to the specific page in the EnVision Tour
 

1. EnVision Navigation
2. Device Thumbnails Overview
3. Digital Values
4. System Alarms
5. EnVision Device Alarms
6. PC based Alarm Relay Output
7. General and Service Device Notes
8. Real-Time Trends
9. Single Loop Tuning
10. Data Logging Overview
11. System Data Logging
12. Device Data Logging / Historical Data File
13. Logging Overview Monitor
14. Historical Data File Viewing
15. Searching Historical Data Files
16. Historical Data File Trend Plot
17. CFR21 Part 11 and NADCAP AMS2750E: Historical Data files (Data Log) and Digital Signatures
18. Orion-Mi / nCompass CM Detail View

   

19. Orion-Mi / nCompass CM Detail View Tab
20. Orion-Mi / nCompass CM Detail View: Auto Tune and Auto/Manual Tabs

21. Orion-Mi / nCompass CM Data Logging Tab
22 Orion-Mi / nCompass CM Schedules Tab (Ramp/Soak Profiles)
23. Orion-Mi / nCompass CM Profile/Schedules: Run, Stop & Hold Profile Schedules

24. Orion-Mi / nCompass CM Schedule Editor Overview
25. Orion-Mi / nCompass CM Schedule Editor: Guaranteed Soak, Loops Active and Auto Start
26. Orion-Mi / nCompass CM Schedule Editor: Stage "Wait For"

27. Orion-Mi / nCompass CM Schedule Editor: Schedule Notes
28. Orion-Mi / nCompass CM - Setup Tab
29. Orion-Mi / nCompass CM Detail View - Setup/IO Monitor
30. Orion-Mi / nCompass CM Detail View - Setup/Schedule Options

 
 
 
Future Design Controls   888.751.5444   csr@futuredesigncontrols.com