PR Paperless Recorder
Page 19 of 38

Orion Series Detail View Tab

The “Detail” view tab provides the user with all current Orion-Mi and nCompass CM “run” data. 

This includes all control loop process values as well as the current setpoints and percentage of output. 

EnVision Orion Serie Detail View Tab

The main digital display window allows the user to select which Orion-Mi / nCompass CM configured within EnVision (top middle) as well as each control loop of the selected Orion-Mi / nCompass CM.  The selected loop will have its configured tagname shown in the top left of the window.  To select other control loops, simply click on one of the tagnames associated with the desired loop in the Device Detail/Point Select list box on the right of the screen.

When running the system in manual mode (Schedule/Profile not running), the control loop setpoints as well as all system events can be accessed and operated by the user.  To change the loop’s setpoint, click on the current setpoint and enter the desired value.

The System Events status indicators provide the user with immediate feedback of the current event status.  The current schedule name, status and events active are also shown at the lower left of the screen.

Page Navigation - Jump to the specific page in the EnVision Tour

1. EnVision Navigation
2. Device Thumbnails Overview
3. Digital Values
4. System Alarms
5. EnVision Device Alarms
6. PC based Alarm Relay Output
7. General and Service Device Notes
8. Real-Time Trends
9. Single Loop Tuning
10. Data Logging Overview
11. System Data Logging
12. Device Data Logging / Historical Data File
13. Logging Overview Monitor
14. Historical Data File Viewing
15. Searching Historical Data Files
16. Historical Data File Trend Plot
17. CFR21 Part 11 and NADCAP AMS2750E: Historical Data files (Data Log) and Digital Signatures
18. Orion-Mi / nCompass CM Detail View


19. Orion-Mi / nCompass CM Detail View Tab
20. Orion-Mi / nCompass CM Detail View: Auto Tune and Auto/Manual Tabs

21. Orion-Mi / nCompass CM Data Logging Tab
22 Orion-Mi / nCompass CM Schedules Tab (Ramp/Soak Profiles)
23. Orion-Mi / nCompass CM Profile/Schedules: Run, Stop & Hold Profile Schedules

24. Orion-Mi / nCompass CM Schedule Editor Overview
25. Orion-Mi / nCompass CM Schedule Editor: Guaranteed Soak, Loops Active and Auto Start
26. Orion-Mi / nCompass CM Schedule Editor: Stage "Wait For"

27. Orion-Mi / nCompass CM Schedule Editor: Schedule Notes
28. Orion-Mi / nCompass CM - Setup Tab
29. Orion-Mi / nCompass CM Detail View - Setup/IO Monitor
30. Orion-Mi / nCompass CM Detail View - Setup/Schedule Options

Future Design Controls   888.751.5444