PR Paperless Recorder
Page 11 of 38

System Data Logging

The system data logger is configurable to record and save data from any or all devices attached to the system, including individual loop controls, separate devices within an Orion-Mi (max of 15 loop controls and 15 monitor points) and Analog Input cards (8 t/c, mA, VDC or 6 RTD inputs).

EnVision Sysem Data Logging Setup

All available data points from each Device can be individually selected for logging by clicking on the checkbox next to the variable’s tagname and placing a red “check” in the box. 

With data logging interval from 1 to 3600 seconds (60-minutes) EnVision provides flexibility for almost any data-logging requirement.

Operator Message to File

When the Device data logger is running, EnVision allows the user to enter status messages that are saved to the data log file.  These messages allow daily events, product movement or even shift changes to be logged and tracked.  These messages are inserted into the log file with a date/time stamp so that they can be reviewed along with the historical data using EnVision’s data viewer. These messages may also be inserted into the data file trend plot.

EnVision System Operator Message

Page Navigation - Jump to the specific page in the EnVision Tour

1. EnVision Navigation
2. Device Thumbnails Overview
3. Digital Values
4. System Alarms
5. EnVision Device Alarms
6. PC based Alarm Relay Output
7. General and Service Device Notes
8. Real-Time Trends
9. Single Loop Tuning
10. Data Logging Overview
11. System Data Logging
12. Device Data Logging / Historical Data File
13. Logging Overview Monitor
14. Historical Data File Viewing
15. Searching Historical Data Files
16. Historical Data File Trend Plot
17. CFR21 Part 11 and NADCAP AMS2750E: Historical Data files (Data Log) and Digital Signatures
18. Orion-M iSeries Detail View


19. Orion-Mi / nCompass CM Detail View Tab
20. Orion-Mi / nCompass CM Detail View: Auto Tune and Auto/Manual Tabs

21. Orion-Mi / nCompass CM Data Logging Tab
22 Orion-Mi / nCompass CM Schedules Tab (Ramp/Soak Profiles)
23. Orion-Mi / nCompass CM Profile/Schedules: Run, Stop & Hold Profile Schedules

24. Orion-Mi / nCompass CM Schedule Editor Overview
25. Orion-Mi / nCompass CM Schedule Editor: Guaranteed Soak, Loops Active and Auto Start
26. Orion-Mi / nCompass CM Schedule Editor: Stage "Wait For"

27. Orion-Mi / nCompass CM Schedule Editor: Schedule Notes
28. Orion-Mi / nCompass CM - Setup Tab
29. Orion-Mi / nCompass CM Detail View - Setup/IO Monitor
30. Orion-Mi / nCompass CM Detail View - Setup/Schedule Options

Future Design Controls   888.751.5444