DIN Controls Standard Features
applicable to C, 90, 100, 200, 300 & P Series Controls
The following Features are standard in all Future Design Control's DIN Control Products.
-
Control Output Type:
-
Relay, ssr Driver or Triac: Configurable as time proportioning or on/off
-
Linear mA/VDC: Proportional PID
-
Proportional Outputs - see Auto-Tune.htm
-
Fuzzy Assisted PID
-
-
Proportional Band Offset adjustment
-
Cycle Time adjustment for time proportioning outputs
-
View Percent Output
-
Percent Output Limit: not applicable to 90 Series
-
-
Controls offer process, deviation, deviation band with and without Hold function. The 300 Series also offers latching & non-latching.
-
Control Failure Configuration: Control Outputs & Alarms independently configurable for on or off
- Input Filter Factor - applicable to C, L, P, 100 & 300 Series
-
The input scan rate for these controls is 5 times per second.
-
In certain applications the Process Variable is too unstable to read accurately.
-
To improve control performance a configurable low pass filter is provided. This first order filter can be set from 0.0 to 60.0 seconds with 0.5 seconds factory default.
-
The following diagram characterizes this filter.
Return to:
Process & Temperature Control Page.htm
90 Series.htm
300 Series.htm
100/C Series.htm
B Series.htm (board level control)
Limit Controls.htm
P Series Profile Controls.htm
Future Design Controls: 888.751.5444 csr@futuredesigncontrols.com